The chemical group Yisheng Petrochemical Co., Ltd. has relied on air purification technologies from Dürr since 2010. The most recent investment in Eastern China Ningbo/Zhenhai includes seven regenerative thermal oxidizer (RTO) air pollution control systems. They ensure reliable, energy-saving, and CO2-reduced purification of the exhaust air streams on a large scale. This results in one of the ‘s’s most significant RTO installations with a 2.31 Mio. Nm3/h treatment capacity. For Dürr, the project is one of the largest of its kind to date.
At its site in Ningbo in the Eastern Chinese province of Zhejiang, the chemical group Yisheng Petrochemical Co., Ltd. mainly produces purified terephthalic acid (PTA). PTA is in demand as a starting material for critical polymers to produce plastic bottles, textiles and food packaging. Yisheng Petrochemical is one of the world’s largest PTA manufacturers and production capacities in Ningbo are correspondingly high. Two of the chemical giant’s seven production lines have an output of three million tons of PTA per year. A particular challenge in producing the colorless powder is treating the partially polluted exhaust air streams. Dürr was entrusted to install its Oxi.X RE systems. The RTO systems remove the harmful components from the exhaust air generated during PTA production. This ensures that no polluted exhaust gases escape into the atmosphere.
Technical excellence for highly effective air pollution control
Dürr supplied seven identical turnkey Oxi.X RE systems for the regenerative thermal oxidation process and a corresponding number of Sorpt.X SW wet scrubbers to Yisheng Petrochemical. Each system consists of a nine-tower Oxi.X RE, a down-stream scrubber and a clean gas stack. The treatment capacity of a nine-tower RTO is about 330.000 Nm3/h, making it one of the world’s most extensive RTO installations with 2.31 Mio. Nm3/h treatment capacity for the seven units.
The exhaust air contaminated with pollutants first passes through a regenerative ceramic heat exchanger. This heats the exhaust air, which is very close to the reaction temperature before reaching the combustion chamber. All pollutants are converted into harmless components in the RTO combustion chamber by exposing them to the optimum combustion temperature. The now purified gases pass through a ceramic heat exchanger, releasing their heat to the ceramic media. This stage completes the regenerative cycle.
After the complete oxidation of the volatile organic compounds (VOC) in the RTO units, an acid scrubber removes bromine and other halogenated compounds from the flue gas. Clean air is emitted to the atmosphere at the height of 60 meters through the stack, which is installed on top of the scrubber.
Economical and energy efficient despite large dimensions
Within a few months, four of the RTO units installed at Yisheng Petrochemical were put into operation and have been operating since July 2021. Three additional units were also put into operation in January 2022. A total of 1,340 tons of stainless and carbon steel are used for the RTOs and their ductwork, as well as more than 200 poppet valves, over 220,000 pieces of ceramic media, and over 150 kilometers of cable. For Dürr, the project is one of the largest of its kind to date.
All regenerative thermal oxidizer systems made by Dürr achieve a destruction and removal efficiency (DRE) of nearly 100%. This is necessary to meet the stringent emission standards in China and elsewhere. Economical and eco-friendly, Dürr’s RTO systems have low maintenance requirements due to sealing-free, horizontally arranged poppet valves and easy inspection access.
Energetically optimized oxidizers from Dürr operate without additional fuel. Fossil fuel is only needed for the heating-up mode. Self-sustaining with the energy input from the exhaust air, the RTO units reduce the client’s carbon footprint by operating in auto-thermal mode.
About Dürr
The Dürr Group has had a direct representation in India since 1997, and Schenck RoTec has since 1986. The Dürr Group currently employs around 680 staff there, offering the entire portfolio including sales and service: Dürr India, based in Chennai, offers painting, application, final assembly and energy efficiency technology products as well as air pollution control, noise abatement systems and battery coating lines. Since April 2015, Dürr India has also been offering on-the-job as well as classroom training in paint and application systems to customers at its training center. Schenck RoTec India, in Noida, produces balancing technology as well as testing and filling technology. The HOMAG Group produces machinery and equipment for the woodworking industry. It has a presence in Bangalore, where it operates a production site and sales and service company HOMAG India.
The Dürr Group is one of the world’s leading mechanical and plant engineering firms with extensive expertise in automation and digitalization/Industry 4.0. Its products, systems and services enable highly efficient and resource-saving manufacturing processes in different industries. The Dürr Group supplies sectors like the automotive industry, mechanical engineering, chemical, pharmaceutical, medical technology and woodworking industries. It generated sales of € 3.32 billion in 2020. The company has around 17,500 employees and 120 business locations in 33 countries. Since February 2021, the majority-owned automation specialist Teamtechnik has also been part of the Group. The Dürr Group operates in the market with the brands Dürr, Schenck and HOMAG and with five divisions:
- Paint and Final Assembly Systems: paint shops as well as final assembly, testing and filling technology for the automotive industry, assembly and test systems for medical devices
- Application Technology: robot technologies for the automated application of paint, sealants and adhesives
- Clean Technology Systems: air pollution control, noise abatement systems and coating systems for battery electrodes
- Measuring and Process Systems: balancing equipment and diagnostic technology
- Woodworking Machinery and Systems: machinery and equipment for the woodworking industry